Vælg din model

I tvivl om model?
Er du i tvivl om hvilken model du har har vi lavet en lille guide så du kan finde kendetegnene ved din model.

iPhone 3G klik her
iPhone 3GS klik her
iPhone 4 klik her iPhone 4S klik her

Du er her: Shop

Ear speaker

Produktbeskrivelse

Dette er den lille højttaler hvor du hører modparten i din iPhone 3G.

Husk reparations kit.

Ear speaker

49 DKK

Varen er på lager
Levering 1-2 hverdage

Dette produkt passer til følgende modeller:
iPhone 3G

Farve: Sort

Antal stk.

Vi modtager:

Leveringstid - 1-2 hverdage. Varen er på lager
Returret - 30 dage, du kan altid få pengene tilbage
Sikkerhed - vi er e-mærket
Hjælp og support - tlf og email hverdage 09-16
Fast fragt - kun 25 DKK uanset størrelse

Der er en guide til brug af dette produkt. Klik her for at åbne guide

Guide til Ear speaker

Trin 1

Remove the screw that holds this bracket in and put it in a safe place.

Trin 2

Use an automotive pick tool to lift the bracket up on the side of where the speaker lies. Slight upward pressure, do not force or pry.

Trin 3

Do the same with the other side and on the bottom of the bracket. This is held in with tension on fingers that clip into the screen midframe.

Trin 4

Once the bracket is loose, you can pull it up carefully maneuvering it up and around the LCD and digitizer connectors.

Trin 5

Peel the old ribbon from the bracket, note the orientation.

Trin 6

Peel off the adhesive backing protectors from the new ribbon, and line up the holes in the ribbon with the ones on the bracket as so.

Trin 7

Use a small screwdriver's shaft to conform the new ribbon to the bracket's contour. Light pressure is only needed.

Trin 8

Use a small screwdriver's shaft to conform the new ribbon to the bracket's contour. Light pressure is only needed.

Vælg din model

Produktbeskrivelse

Ear speaker

49 DKK

Vi modtager:

Guide til Ear speaker

Trin 1

Trin 2

Trin 3

Trin 4

Trin 5

Trin 6

Trin 7

Trin 8

PhoneTech.dk

Phonetech.dk ejes og drives af PhoneGadget ApS