Vælg din model

Vælg den model du ønsker reservedele til nedenfor. Du kan ved at navigere dig rundt bestille reservedele til alle typer modeller

I tvivl om model?
Er du i tvivl om hvilken model du har har vi lavet en lille guide så du kan finde kendetegnene ved din model.

iPhone 3G klik her
iPhone 3GS klik her
iPhone 4 klik her iPhone 4S klik her

Shop

iPhone 4/4S covers

Alu Designer bagplade

100 DKK

Varen er på lager
Levering 1-2 hverdage

Dette produkt passer til følgende modeller:
iPhone 4/4S covers

Farve: Grå

Antal stk.

Produktbeskrivelse

Stilet bagplade til din iPhone 4/4S. Skil dig ud fra mængden med denne nye stilfulde bagplade.

Enkel at montere.

Husk reparationskit.

Der er en guide til brug af dette produkt. Klik her for at åbne guide

Guide til Alu Designer bagplade

Trin 1

Before disassembling your iPhone, be sure it is powered off.
Remove the two 3.6 mm Phillips screws next to the dock connector.
Apple has recently substituted the two Phillips screws with 5-Point "Pentalobe" screws. If your iPhone 4 has 5-Point "Pentalobe" screws instead of Phillips, please refer to the second picture.
Remove the two 3.6 mm Pentalobe screws next to the dock connector.
During reassembly, we recommend you replace the 5-point screws with equivalent Phillips screws. Our Liberation Kit provides the tools and screws needed to replace the Pentalobe screws with Phillips screws.
The 5-Point Screwdriver should only be used once, as it has the potential to strip the screws.